Industrial sliding doors are indispensable for modern industrial plants. The measurement, production, installation and debugging of industrial sliding doors have attracted great attention from users. Therefore, when installing industrial sliding doors, strictly follow industry standards.
1. Door body: The sealing plates at both ends of the industrial sliding door panel must be the same; the center hinge of the industrial sliding door panel must be kept on the same horizontal line up and down.
2. Track: The track and balancing device of the industrial sliding door must be kept horizontal when installed without any deviation; the track installation should be kept parallel and vertical; the connection between the auxiliary rail and the track is fixed with carriage screws.
3. Hardware accessories: The welding of the center beam of the industrial sliding door must be strong and beautiful; the tower wheel, torsion spring fixation, track, expansion screw, and support frame must be installed and fixed; the length of the steel wire rope of the industrial sliding door must be equal; motor control The wire must be installed in the wire trough.
4. Debugging: After the installation and debugging of the industrial sliding door is completed, the site needs to be cleaned to keep the environment tidy; each industrial sliding door should be affixed with a sign; clearly communicate with the users of the industrial sliding door and teach the operators For daily operation and use, leave after-sales contact information for the convenience of users.
