Rapid Roll Door are a single-phase capacitance working motor for unmaturized short-time work. It is limited to the space of the tubular motor, so the tubular motor can only be used to use the elongated method and must be small, and the weight is light.
Soil parts features:
1. Stator: In addition to usually the stator core demand, the Blue Cotton Rapid Roll Door is used to use cold-rolled silicon steel sheets, and use the arc welding method to make a stator core to avoid
Due to the elongation of the stator, if the rive is used. Or the problem is defensible to affect the problem of the track.
2, rotor: To avoid elongated rotor cast aluminum simply show, thin strips, whose rotor cast aluminum selection open groove method.
3, end cover: The front and rear end caps before the motor are made of plastic. And the four gaps composed of two heads of the stator core are used as the installation stop. The large length of the plastic end cap can be thoroughly ensured by the demand of the winding end climbing interval.
With the advancement of society and the continuous improvement of people's living standards, the tubular motor of the rolling door is widely applied to the small electric shutter door of the family garage, the door, the window and the hotel, the conference hall. It is more applicable to these, which is fully reflected. Quick and beautiful.
The power of the light electric
Rapid Roll Door is a new type of single-phase capacitance working motor, which is called a tubular motor due to its fine shape. The motor is small, light, and the starting torque, and the maximum torque can be satisfied with the need to improve the demand for light electric
Rapid Roll Door.
